KNOCK-DOWN REBUILD ELECTRICIAN

KNOCK-DOWN REBUILD ELECTRICIAN

Level 2 ASP · Demolition & Construction

A knock-down rebuild touches the electricity supply at least three times: disconnection before demolition, temporary builders power during construction, and the permanent connection of the new home. Sydney Power Group handles all three as a single accredited Level 2 ASP — one contractor, one point of contact, and no gaps between stages where your project can stall.

Stage 1 — Disconnect Before Demolition

We assess the existing supply — overhead or underground — then complete the demolition power disconnection: meter removal via your retailer, physical disconnection at the network, and removal of the service mains and point of attachment. Because the lot is being rebuilt, we structure the disconnection so reconnection stays straightforward, and we give your demolisher the written electrical clearance they need to start.

Pre-demolition electrical disconnection for knock-down rebuild

Stage 2 — Temporary Builders Power

Most builders want power on site from day one of construction. We install a temporary builders pole or meter box, arrange the metering, and connect it to the network — single-phase or three-phase depending on the build. Our guide to temporary builders supply covers the options; timing it with the demolition means the site is never left waiting on power.

Temporary builders power for knock-down rebuild site Sydney

Stage 3 — Connect the New Home

As the build finishes we complete the permanent works: new consumer mains, switchboard connection, new property connection to the network, and smart metering. Many new builds also switch from overhead to underground supply at this stage — we'll advise what the network requires for your street. The temporary supply is then removed and the account transitions to the new meter.

New home power connection after knock-down rebuild

Working With Your Builder & Demolisher

We regularly coordinate directly with builders and demolition contractors so the homeowner isn't stuck relaying messages — scheduling around demolition dates, slab pours and frame stages. The earlier we're engaged the smoother the sequence runs; distributor lead times are the main constraint, not the works themselves. Planning a knock-down rebuild? Call 0466 125 125 for a staged quote covering all three phases up front.

Level 2 electrician coordinating with builder on knock-down rebuild
KNOCK-DOWN REBUILD ELECTRICIAN
Free Assessment

Call us now for a no-obligation quote. Emergency response available 24/7 — on-site within 60 minutes across Sydney.

0466 125 125Get a Free Quote

What We Cover

  • Pre-Demolition Disconnection
  • Temporary Builders Power
  • New Consumer Mains & Switchboard
  • Permanent Reconnection & Metering
  • One Contractor Start To Finish
Accredited & Licensed
ASP Authorisation No. 5334
Contractor Licence 318221C
$20 million public liability insurance
ASP Accredited
ASP Authorisation No. 5334
Licensed Electricians
Contractor Licence 318221C
Fully Insured
$20M public liability + workers comp
Australian Owned
Sydney based & operated
Emergency 24/7
On-site within 60 minutes
15 Years in Business
Level 2 network specialists

What Sydney Says About Us

Don't take our word for it — read genuine reviews from real customers who booked our knock-down rebuild electrician service on our Google profile, or leave one after your job is done.

Read Our Google Reviews

Recent Work

Old supply disconnected
Stage 1 — disconnection
Builders power installed
Stage 2 — builders power
New underground connection
Stage 3 — new connection
Smart meter energised
Metered & energised

READY TO GET CONNECTED?

Free assessment on any network electrical job. Emergency? We answer around the clock.